imaWorx?CXP-12?Quad

設備功能

處理器

Xilinx Ultrascale+ KU3P

板載內存

1,5 GByte DDR4-RAM

I/O模塊接口（信號觸發和同步）

Trigger/GPIO-IF (Opto Trigger, TTL Trigger)

相機接口

標準

CoaXPress 2.0/2.1

接口

CXP-12

配置

CXP-12; up to 4 cameras

接頭

4 x Micro-BNC/HD-BNC

功率輸出

17W/24V DC regulated power per CXP connector

相機支持

area scan camera, line scan camera

芯片類型

Grayscale sensor, CFA sensor (Bayer), RGB sensor

芯片分辨率

32k*64k (area scan sensor), 16k (line scan sensor)

位深

8-16-bit (grayscale), 24-48-bit (color)

數據帶寬

4 x 12,5 Gbit/s

數據帶寬（每個端口；總計）

12,5 Gbps; 50 Gbps

端口數

4

測試環境

Camera Simulator

主機PC接口

PC總線接口

PCIe 3.1 x8

PC總線接口性能

7876 MB/s (theoretical), 6520 MB/s (typical/max.)

控件和通用I/O

觸發板GPIO接口

Box connector (34-pin)

板載GPIO接口

One 34-pin flat cable connector onboard: 8 input signals and 8 output signals with open-drain optionally as 4 opto-coupled inputs (4,5V - 28V), optional 2 opto-coupled differential inputs (RS422); 4 opto-coupled outputs (4,5V - 28V)

板載前端GPIO接口

3 differential input signals or 2 differential and 1 single-ended signal or 4 single-ended signals; 2 TTL-complaint output signals; configurable by software GPIOTool; max. voltage of the input signals between 4,5V and 25V

GPIO同步和控制

Configurable Trigger System supporting several trigger modes (grabber controlled, external trigger, gated, software trigger) and shaft encoder functionality with backward compensation, Multi-Camera-Synchronization

GPIO接口概述

onboard: 8in/8out (max.), TTL or opto-coupled, Front GPIO: up to 3 differential signals in, up to 4 single-ended signals in (configuration dependent), 2 TTL outputs

處理功能

基本功能

Invert, LUT, Mirroring, White Balance, ROI, Image Selector

物理和環境信息

尺寸

PCIe Standard height, half length card: 167.64 mm length x 111.15 mm height

重量（典型值）

274 g

功耗/電源

Typ. 13,4W@12V, excluding camera and I/O power output

操作溫度

0 - 50°C (32°F - 122°F)

存儲溫度

-50 - 80°C (-58°F - 176°F)

相對濕度（操作、存儲）

5% - 90% non-condensing (operating), 0% - 95% (storage)

MTBF

48.440 h

合規

KC, WEEE, REACH, RoHS, CE class A, FCC class B

軟件

軟件驅動程序

Linux 64-Bit, Windows 11 / 10 (32-Bit), Windows 11 / 10 (64-Bit)

軟件工具

microDisplay X (Acquisition control and viewer), microDiagnostics (Analysis and service tool), GenICam Explorer (Camera configuration tool), SDK, Documentation, Device Drivers, pylon Software Suite

軟件API

Framegrabber SDK, .net interface, pylon SDKs

BV-軟件兼容性

Halcon, VisionPro, Labview