microEnable?5?marathon?ACL

設備功能

處理器

Xilinx Kintex7 XC7K70T

板載內存

512 MByte DDR3-RAM

I/O模塊接口（信號觸發和同步）

onboard: 8in/8out (max.), TTL or opto-coupled, Front GPIO: up to 3 differential signals in, up to 4 single-ended signals in (depends on configuration), 2 TTL outputs

通過接口供電（每個端口）

PoCL (4W/12V per cable, Safe Power)

相機接口

標準

Camera Link 2.0

接口

Camera Link

配置

CL-deca (80bit), CL-full, CL-dual base, CL-base, CL-medium

接頭

2 x SDR/HDR26 (miniCL)

功率輸出

PoCL SafePower, 4W/12V per cable

相機支持

area scan camera, line scan camera

芯片類型

CFA sensor (Bayer), RGB sensor, Grayscale sensor

芯片分辨率

16k*64k (area scan sensor), 32k (line scan sensor), 16k (-65k) (line scan sensor, depends on applet)

位深

8-16-bit (grayscale), 24-48-bit (color)

數據帶寬

6,8 Gbit/s (850 MB/s)

數據帶寬（每個端口；總計）

6,8 Gbps; 6,8 Gbps (850 MB/s)

端口數

2

測試環境

Camera Simulator

主機PC接口

PC總線接口

PCIe 2.1 x4, DMA1800

PC總線接口性能

up to 1.800 MB/s (sustainable)

控件和通用I/O

觸發板GPIO接口

Box connector (34-pin)

板載GPIO接口

One 34-pin flat cable connector onboard: 8 input signals and 8 output signals with open-drain optionally as 4 opto-coupled inputs (4,5V - 28V), optional 2 opto-coupled differential inputs (RS422); 4 opto-coupled outputs (4,5V - 28V)

板載前端GPIO接口

2 TTL outputs, up to 20 MHz frequency, One 15-pin D-Sub socket: 2 opto-coupled differential inputs (RS422) and 1 opto-coupled differential / single ended input

GPIO同步和控制

Configurable Trigger System supporting several trigger modes (grabber controlled, external trigger, gated, software trigger) and shaft encoder functionality with backward compensation, Multi-Camera-Synchronization

GPIO接口概述

Front GPIO: up to 3 differential signals in, up to 4 single-ended signals in (depends on configuration), 2 TTL outputs, onboard: 8in/8out (max.), TTL or opto-coupled

處理功能

基本功能

Mirroring, Image Selector, LUT, White Balance, Invert, ROI, Offset/Gain/Gamma correction, Tap Sorting (Sensor Readout Correction)

物理和環境信息

尺寸

PCIe Standard height, half length card: 167.64 mm length x 111.15 mm height

重量（典型值）

200 g

功耗/電源

12 V, 1 A Voltage, typ. current (actual values depend on processing)

操作溫度

50° (0 LFM*), 60° (100 LFM*) FPGA operating temperature: 0°C to 85°C, *LFM = Linear Feet per Minute, unit for measuring airflow velocity

存儲溫度

-50°C up to 80°C

相對濕度（操作、存儲）

5% - 90% non-condensing (operating), 0% - 95% (storage)

MTBF

pending

合規

WEEE, RoHS, REACH, CE class B

軟件

軟件驅動程序

Linux 64-Bit, Windows 11 / 10 (64-Bit), Windows 11 / 10 (32-Bit)

軟件工具

microDisplay (Acquisition control and viewer), GenICam Explorer (Camera configuration tool), microDiagnostics (Analysis and service tool), Device Drivers, SDK, Documentation

軟件API

Framegrabber SDK, .net interface

FPGA編程

not programmable

BV-軟件兼容性

Halcon, Labview, others on request, VisionPro